- Look around: drag to turn the rig, scroll or pinch to zoom, right- or middle-drag, or two fingers, to pan.
- Guided tour: Begin Guided Tour (top centre, or at the top of the Parts list on phones) visits every part in order: it flies to the part, circles it, then opens its panel and plays the narration. Pause and resume with the same button or the play/pause button at the bottom right; moving the view or closing a panel pauses it, and Esc or ✕ ends it.
- Learn a part: tap a numbered icon or the equipment itself. Use the Parts list to jump straight to one.
- Graphics and night: The gear button (bottom of the right-hand buttons) opens Settings; Night Mode is at the top. Graphics chooses Auto, Ultra, High or Low; Auto picks a level for your device and steps down if it struggles. Ultra adds bounce light, reflections, glow and smooth edges; High and Ultra add light beams at night and drifting exhaust. Each effect can be switched off or turned up under Effects. Night switches to the site lighting: light towers, mast floodlights and the camp.
- Motion and sound: the rig drills on a loop: the top drive turns the pipe down one stand, the slips are set, the top drive hoists and picks up the next stand from the setback, the iron roughneck makes up the connection, and drilling continues. Motion in Settings pauses it; Sound turns on site ambience, which gets louder as you walk up to the generators, pumps and shakers.
- Walk the pad: the person button puts you on the ground at real scale. Desktop: WASD to move, mouse to look, Shift to run, Space to jump, Esc to release the mouse. Phones: left stick to move, drag anywhere else to look.
The model is a modern US "super-spec" pad rig: about 1,500 hp, AC powered, 750,000 lb hookload, 7,500 psi mud system, and a hydraulic walking system. It is built from the TrainingPro3D rig model, rescaled to real size and updated with a top drive, iron roughneck, pipe-handling catwalk and walking feet.
Every part has recorded narration; the full text is under Narration text in its panel.
Want one of these for your own equipment? Request a quote →
Built with three.js and three-mesh-bvh (MIT licence).